Lapidary / Gemstone Community Forum
June 03, 2020, 07:23:32 pm
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 
  Home Help Search Login Register  

Wire Work & Metalsmithing

Pages: [1]   Go Down
  Print  
Author Topic: Wire Work & Metalsmithing  (Read 678 times)
Taogem
Hero Member
*****
Offline Offline

Gender: Male
Posts: 12153



View Profile
« on: February 09, 2008, 03:25:09 am »

Choosing a Technique - Wire Work & Metalsmithing

Wire Work - Wire Wrap



Wire is a popular and versatile jewelry component that you may want to incorporate into your jewelry, even if it's not your favorite technique. Soft metal wires like copper, nickel, and sterling silver can be easily bent and curled into rings, links, and chain components using a collection of basic pliers and other tools.

These supplies will require a bit of an investment up front, and generally are more expensive than basic bead stringing supplies. However, a decent set of tools will last you many years, if not a lifetime.

Wire work is the favorite technique for making simple drop earrings, and you might even save money on pre-made findings by learning to make your own. Some crafters are attracted to wire work because wrapping techniques can be used that eliminate the need for soldering. As a beginner, you can purchase more affordable wire (typically copper) to practice with, and then move on to pricier sterling silver wire, gold filled wire, and even 24 karat wire, if you'd like.


Metalsmithing

Metalsmithing encompasses many varying techniques for working with metals, including fabrication using metal sheet, casting using molten metal, and raising and repousse. Most of the fine jewelry you see featuring set faceted gemstones and expensive precious metals are created using one or more of these methods.

Unlike the other jewelry making approaches, metalsmithing is an easy self-teacher. It can be very helpful to take even one introductory class in the area you're most interested in.

The most basic, yet rewarding, metalsmithing methods include shaping of metal sheet (by drilling, sawing, and filing) and soldering. Unfortunately, copper and sterling silver cannot be successfully soldered using a solder iron. You'll need an appropriate torch setup and an array of special chemicals that are harmful if not handled properly.

In fact it's the safety challenges, combined with the cost of equipment and studio setup, that discourage many from venturing into metalsmithing. For myself, I am a self starter. I have not yet dove into metalsmithing, but an approach some may consider is to begin by taking a basic jewelry metalsmithing class in your community. You'll be able to determine whether metalsmithing is for you, and you may even find that the studio where the class is held is available for personal use - eliminating the need to create your own studio and invest in expensive equipment.

Myself......, When I do get ready to dive in, it will be like a lot of other things. I will most likely go through all the trials and tribulations that go with self teaching ones self

  ;)
Report Spam   Logged

Share on Facebook Share on Twitter



Pages: [1]   Go Up
  Print  
 
Jump to:  

Bookmark this site! | Upgrade This Forum
SMF For Free - Create your own Forum

Powered by SMF | SMF © 2016, Simple Machines
Privacy Policy