Lapidary / Gemstone Community Forum
September 23, 2023, 02:35:24 pm
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
 
  Home Help Search Login Register  

Rock Oil for Slab Saw

Pages: 1 [2] 3  All   Go Down
  Print  
Author Topic: Rock Oil for Slab Saw  (Read 1806 times)
stonesthatrock
Guest
« Reply #15 on: August 23, 2009, 12:00:07 pm »

we found the food grade mineral oil to work the best.  No smell, easy to wash off and its great for you skin......... ;D
Report Spam   Logged
bobby1
Hero Member
*****
Offline Offline

Gender: Male
Posts: 3595


View Profile
« Reply #16 on: August 23, 2009, 12:02:57 pm »

What does it taste like??? I'd prefer cinnamon.
Bob
Report Spam   Logged

rodney
Guest
« Reply #17 on: September 02, 2009, 05:22:23 pm »

I use a food grade mineral oil that has no smell or toxicity.  It has a high flashpoint and works great in my 14" Covington slab saw.  Covington Rock Hound oil $79 per 5 gal bucket.  Diamond Pacific Roc Oil is another food grade mineral oil with no smell or toxicity.  Its like $115 per 4 gal or $30 per gal.  I use the Covington on everything and it never smells even after long use.

Mark

  Nothing better,but  I use the tech grade.  Only difference it just one step from
food grade refinment.  Cost is about $1.50/gal difference.

Rod
Report Spam   Logged
Mark
Hero Member
*****
Offline Offline

Gender: Male
Posts: 5575



View Profile WWW
« Reply #18 on: September 02, 2009, 06:13:30 pm »

I would still like to find a cheap local source for some oil, maybe someone who will also take my old oil.

Mark
Report Spam   Logged

catmandewe
Moderator
Hero Member
*****
Offline Offline

Gender: Male
Posts: 1160



View Profile WWW
« Reply #19 on: September 02, 2009, 09:16:12 pm »

I would still like to find a cheap local source for some oil, maybe someone who will also take my old oil.

Mark

I filter my old oil and reuse it. I can reclaim about 3-4 gallons of clean oil out of a 5 gallon tank of sludge. Use large paper grocery sacks to line a 5 gallon bucket with holes drilled all over it, which in turn drains into a receptacle for the clean oil. I use a 55 gallon drum with a hole cut in the lid that the 5 gallon bucket sits in, and the clean oil drains into the drum. Then I have a pump in the drum and I pump out clean oil whenever I need it.
I started out with a 5 gallon bucket draining into a kitchen garbage can, but things seem to expand as we go. When the bucket is full of solids I dump it into a garbage bag and put it in the garbage can or I have a pothole out at my property that I dump it into, it makes a kind of concrete when it dries and fills holes good. I do use technical grade mineral oil which is water soluble and is non toxic.
Just thought I would throw that out there.

Have a great day...................Tony
Report Spam   Logged





Get free shipping and/or discounts on products at Cabking by using the following link.
http://cabking.com/ref/IdahoRockShop/
r49miner
Guest
« Reply #20 on: November 29, 2009, 07:00:09 pm »

I've heard of some people getting the mineral oil at a tractor supply store rather cheaply. I'm using some surplus refrigeration oil that I got a number of years ago.
Bob

I just read in another forum that a lot of the people are using Animal Mineral Oil that some purchased at the local feed store in the States. Thought I would pass it along to see what evryone thinks. I was surprised to come here and basiclly have an answer before I asked it. Seems like some kind of mineral oil is being used by a lot of people here.

I am new to the forum, new to cutting rocks and gems but not to life. Starting new hobby at 65 can be frustrating when you have the equipment but don't know how to start using it. I have 5 saws. A4", 6", 10" 24" and a 36". I bought them all used and what a mess it was trying to clean the big ones. After emptying the foul smelling thick soup and gunk from the saws (almost a tar), I didn't know what to put back into them so I could cut rocks. If I use a water blend I'm afraid the blades might rust and become useless if the diamonds fall out.
Someone told me to use honing oil but that was really expensive. I will need a lot of whatever I have to use.

Finally the question. Do you leave the sallution/oil in the saws till the next time you use them, maybe a month???

Report Spam   Logged
ScarlettoSara
Hero Member
*****
Offline Offline

Gender: Female
Posts: 8963


Somewhere over the rainbow... way up high


View Profile
« Reply #21 on: November 29, 2009, 07:08:35 pm »

LOLOLOL Bobby you are so dang crazy...
Report Spam   Logged

"I tramp a perpetual journey.
― Walt Whitman, Song of Myself
catmandewe
Moderator
Hero Member
*****
Offline Offline

Gender: Male
Posts: 1160



View Profile WWW
« Reply #22 on: November 29, 2009, 08:51:42 pm »

Hey Chuck,
The oil stays in the saw until it becomes too filled with solids and needs to be drained and cleaned. Depending on how often you use your saws could be anywhere from a monthly to a yearly thing. The oil keeps everything from rusting, also.
With the number of saws you said you have you may need to get a 55 gal drum of it. I get my oil in the drum for around $385 per drum.

Animal mineral oil is food grade mineral oil, used to cure colic and constipation in horses.
You can also go to Walmart and buy mineral oil in the pet section or the baby section, baby oil is mineral oil with perfume in it. The perfume wears out pretty fast in a rock saw. This would be fine for a little 10" saw or a trim saw, but if you need oil for larger saws, you would be better off finding a larger supplier.

I know one guy who uses reclaimed antifreeze in his saws. I personally wouldn't do it, but he has been doing it for years and he cuts quite a lot of material.

Have a great day.............Tony
Report Spam   Logged





Get free shipping and/or discounts on products at Cabking by using the following link.
http://cabking.com/ref/IdahoRockShop/
Ajo
Hero Member
*****
Offline Offline

Gender: Male
Posts: 1560



View Profile WWW
« Reply #23 on: November 30, 2009, 03:33:19 pm »

I have been trying to locate a supplier for food grade or technical grade cutting oil. I have looked all over Tucson. I have oil suppliers in town, but everytime I ask for the stuff they look at me like I am crazy. They suggest that I use almag or pella oil. Is there a name brand that I should be telling them? Who typically supplies this type of oil? I know covington dealers have "Rockhound Oil". I am looking for a less expensive source. Anyone have any suggestions? Eric.
Report Spam   Logged

Eric

RedSkygems.com

Taogem
Hero Member
*****
Offline Offline

Gender: Male
Posts: 12153



View Profile
« Reply #24 on: November 30, 2009, 05:42:41 pm »

Gosh Eric,

Wish I could help..

I would like to emphasize the use of animal related mineral oil.. As mentioned within this thread. It truly does work most excellent, and can be purchased for about 13.00 a gallon on average.
Report Spam   Logged
slabbercabber
Hero Member
*****
Offline Offline

Gender: Male
Posts: 696


View Profile
« Reply #25 on: December 12, 2009, 06:17:27 pm »

  I have been using B100 biodiesel for about two years now.  It is cheap.  It has a high flash point.  It is biodegradable.   It is almost nontoxic.  It has a low vapor pressure.  The downside is that it is made stable by flocculation with lye.  The trace amount of lye remaining makes it a pretty good paint remover.  Other than stripping my saws, it has performed admirably.   Just to add to the plusses, dish soaps are formulated to clean just this thing.  I have found no references that would confirm my results so you are on your own using this, but I am sold.  If you can find it, an even better oil would be biobased transformer oil.  It is formulated to conduct heat.
Report Spam   Logged
ElectricMonk
Guest
« Reply #26 on: June 02, 2011, 03:25:34 pm »

Sort of an older thread but it might be useful info for folks in the Pacific Northwest area.

The "Coastal Farm and Ranch" supply sells livestock mineral oil at $14.00/gal

http://www.coastalfarm.com/coastal_farm_big_r1.cfm?page=locations

The manufacturer is "The Qualis Group", still trying to locate MSDS info online. Picking some up later today and will post any info I find that might be relevant.

Again, thanks for an awesome forum :)
Report Spam   Logged
philosophersstone357
Guest
« Reply #27 on: June 13, 2011, 09:40:19 pm »

I have used Roc Oil for several years now because it is non-toxic and has very little oder but also because it is light and the particles settle to the bottom unlike baby oil which is much thicker and tends to suspend and make a thick sludge and has to be changed sooner than a lighter mineral oil. I have heard of animal oil as well and have considered trying it  but does anyone know the vescosity, is it light or rate the same as baby mineral oil.
Report Spam   Logged
johnjsgems
Hero Member
*****
Offline Offline

Posts: 924


View Profile
« Reply #28 on: June 14, 2011, 07:50:29 am »

When I had my Frantom 10" saws I used Roc Oil too.  Very nice but now very expensive oil.  Ajo, a customer of mine in Benson buys oil at "Canyon State Oil".  I think he said it was Almag Light Machine Oil and $9 a gal. two years ago.  In SO CAL, Dion & Sons sell Amber Neutral 100.  I'm guessing it is the same as Rock Hound Oil and half the price.  Biggest trick is finding local sources to avoid shipping charges on 5 or 55 gal containers. 
Report Spam   Logged
Ajo
Hero Member
*****
Offline Offline

Gender: Male
Posts: 1560



View Profile WWW
« Reply #29 on: June 14, 2011, 08:45:46 pm »

Thanks for the info. I am just about to change the oil in my 24". I will check it out. Ajo.
Report Spam   Logged

Eric

RedSkygems.com



Pages: 1 [2] 3  All   Go Up
  Print  
 
Jump to:  

Bookmark this site! | Upgrade This Forum
SMF For Free - Create your own Forum

Powered by SMF | SMF © 2016, Simple Machines
Privacy Policy