"Here's something completely different. I was inspired by a cuff I saw elsewhere and decided to try my hand at it. Had a great deal of difficulty getting everything soldered onto the base, perhaps 18 ga was too thick for that purpose. I couldn't get the solder to flow where I wanted it to, the wires heated up faster than the backing. I'll try my biggest torch tip next time and see if I just needed more heat. I think it turned out OK for a prototype."Try heating from the bottom with the larger tip......it may take a moment or to longer. Also, you can use a solder pick to smooth out the rough solder between the wires in the braid. Flux first.
Excellent design concept.............................
